| Part
Number |
Specifications |
| CHM-284 |
Master
Disconnect Switch
|
| Single Pole
battery disconnect, Two Positions: Off-On |
|
| Rating:
6-36V DC; 175A continuous 1000A intermittent 15 sec. On, 5 min.
Off |
| Terminals:
two 3/8" Copper Studs |
| Chrome plated
lever |
| Installation:
Through hole - Clearance for 3/4" dia. mounting stem |
| CH24505 |
Lockout
Lever Kit for Master Disconnect Switch |
| For use
with a padlock to secure Disconnect Switch in Off position |
|
| CH7702 |
Headlamp
Dimmer Switch
|
| Depress
release for LOW Beam, depress release for HIGH beam |
Picture
not available
|
| Circuitry
SPDT |
| Positions
ON-ON |
| Mounting
Location - On floorboard |
| Housing
- Corrosion-resistant diecast metal |
| Mounting
- Two 7/32" diameter holes, 1-5/8" on center |
| Terminals
Three Blade |
|
Replacement for: Delco
U803 Ford; COTF, COTZ-13A024A; Motorcraft SW-263
|
| CH7762 |
Headlamp
Dimmer Switch |
| Depress
release for LOW beam, depress release for HIGH beam |
Picture
not available
|
| Circuitry
- SPDT |
| Mounting
Location - on floorboard |
| Housing:
Corrosion-resistant diecast metal |
| Mounting:
Two 7/32" diameter holes, 1-5/8" on center |
| Terminals
Three Blade |
| Replacement
for AM 5457282Delco 1997028, 1997031, 1997035, 1997037, 1997040,
1997043, D-803, D-804, D-808, D-809, D-810 GM 538446, 578005, 1539288 |
| CH90005-01 |
Reversing
Rotary Switch |
| Monentary
On-Off - Momentary On |
Picture
not available
|
| Current
Rating 15A |
| Terminals
4 Screw |
| Contacts
Silver |
| Mounting
Stem 1/2" - 20 x 1-1/4" |
| Actuators
Lever |
| Case Plated
Steel |
| O-Ring Seal
No |
|
Number of Positions
3
|
| CHM-608 |
Plasticized
Marine Construction Momentary Switch |
| Off-On,
normally Off, On with button depressed, spring return to Off |
|
| Terminals
- Two 18AWG wire leads 12" (304.8 mm) long |
| Contacts:
Copper Alloy |
| Button:
Brass, Chrome-plated |
| Face Nut:
Brass with black rubber cap and brass hex nut |
| Sealing:
Plasticized body for moisture and dirt protection |
| Protective
Cap: Rubber |
| Housing:
Brass |
| Weather-Resistant:
Plasticized body for moisture and dirt protection |
| Electrical
Rating: 12A at 12V DC |
| CH90030 |
Heavy
Duty Momentary Push Button Switch |
| Off-On,
normally Off, On with button depressed, spring return to Off |
 |
| Terminals:
Two 8-32 screws |
| Mounting
Panel Thickness: Up to 1/4" (6.35mm), 5/8"-32 (15.87mm)
dia. |
| Contacts:
Silver |
| Button:
Plastic, 15/32 (11.90) diameter |
| Face Nut:
Cap and Nut assembly, hex nut |
| Protective
Cap |
| Housing:
diecast |
| Dimensions:
1.120 dia. |
| Is NOT Weather-resistant |
| Electrical
Rating: 35A at 12V DC, 20A at 24V DC |
| CH9095 |
Heavy
Duty Momentary Push Button Switch |
| Off-On,
normally Off, On with button depressed, spring return to Off |
|
| Terminals:
Two 8-32 screws |
| Mounting
Panel Thickness: Up to 1/4 (6.35mm), 5/8" -32(15.87mm) dia. |
| Contacts
Silver |
| Button:
Chrome-plated |
| Face Nut:
Chrome-plated, zinc-plated hex nut |
| Housing:
diecast |
| Dimensions:
1.120 dia. |
| Is NOT weather-resistant |
| Electrical
Raing: 35A at 12V DC, 20A at 24V DC |
| CH9245 |
Heavy
Duty Momentary Push Button Switch |
| Off-On,
normally Off, On with button depressed, spring return to Off |
|
| Terminals:
Two 8032 screws |
| Mounting
Panel Thickness: Up to 3/16" (4.76mm), 5/8" -32 (15.87mm)
dia. |
| Contacts:
Silver |
| Button:
Plastic, 15/32" (11.90) diameter |
| Face Nut:
Black Cap and Nut assembly, hex nut |
| Protective
Cap: Rubber |
| Housing:
diecast |
| Dimensions:
1.120 dia. |
| Weather-Resistant |
| Electrical
Rating: 35A at 12V DC, 20A at 24V DC |
| CH956-3124 |
Heavy
Duty Ignition & Start Switch |
| Anti-Restart.
Accepts Packard Connector No. 2962912 |
|
| Terminals:
5 Screw |
| Actuators:
Lever |
| Sealed Terminal
Insulator |
| O-Ring Seal
in Stem |
| Ground Terminal |
| Mounting
Stem: 1"-24 |
| Number of
Positions: Three |
| Positions:
Off-Ign/Acc-Ign/Start |
| Accessory
(Current Rating at 12V DC): 20A |
| Ignition
/ Run (Current Rating at 12V DC): 20A |
| Start (Current
Rating at 12V DC): 10A |
|
Ground (Current Rating
at 12VDC): 1A
|
| Contacts:
Copper |
| Case Material:
Plated Steel |
| Mounting
Panel Thickness: 0.030 - 0.090" |
| CH91113 |
Back-Up
Lamp Switch |
| Normally
Open, Contacts Closed when ball is depressed, spring return to Normally
Open |
|
| Circuitry:
SPST |
| Terminals:
Screw |
| Mounting:
9/16" - 18 UNF -2A thread, 5/16" long |
| Gasket seal
in case |
| Rating:
20A at 12V DC |
| Normal Position:
Contacts open |
| Contacts:
Copper |
| Transmission
mounted |
| CH8640 |
Oil
/ Air Pressure Switch |
| Function:
Contacts open at rising pressure |
|
| Heavy Duty
Construction, Self-grounding |
| Circuitry:
SPST |
| Rating:
12-24V |
| Normal Position:
On |
| Mounting
Stem Dimensions: 1/4" -18 dryseal thread (NPTF) 7/16"
(11.11mm) Long |
| Operating
Range: 60 to 70 PSI |
| Maximum
Operating Range: 150 PSI |
| Sw. Burst
Pressure: 1500 PSI |
| Terminal
Size: Stud & nut (10-32 thread) |
| Replacement
for Chrysler 1787025, 1788700, Delco 3750911, 3929518, Ford B6Q,
B8Q-18737A, C5TZ-2A574A, International 194702-R91, Motorcraft SW-337 |
| CH8658 |
Oil
/ Air Pressure Switch |
| Function:
Contacts open at rising pressure |
No
Picture Available
|
| Heavy Duty
Construction, Insulated Contacts |
| Circuitry:
SPST |
| Rating:
12-24V |
| Normal Position:
Off |
| Mounting
Stem Dimensions: 1/8" -27 dryseal thread (MPTF) .56" Long |
| Operating
Range: 2 to 5 PSI |
| Maximum
Operating Pressure: 150 PSI |
| Sw. Burst
Pressure: 1500 PSI |
| Terminal
Size: Two Scree, (8-32 thread) |
| Replacement
for Navistar 873706R91 |
| CH86284 |
Oil
/ Air Pressure Switch, insulated circuit |
| Normally
Open |
|
| Function:
Contacts close at rising pressure |
| Heavy Duty |
| Circuitry:
SPST |
| Normal Position:
Off |
| Mounting
Stem Dimensions: 1/8" -27 dryseal thread (NPTF); 3/8"
(9.53mm) Long |
| Operating
Range: On at 2 to 6 PSI |
| Maximum
Operating Pressure: 150 PSI |
| SW Burst
Pressure: 1500 PSI |
| Two Blade |
| Replacement
for AM5758695, Delco 10001858, 14004902, 25036279, 533, D1818, International
1324244-R9, Motorcraft SWG-1709 |
| CH8626 |
Hydraulic
Stoplamp Switch |
| Contacts
close at rising pressure 413.65 to 827.37 kPa(60-110psi) |
|
| Circuitry
SPST |
| Normal Position:
Off |
| Terminals
Two 6-32 Screw |
| Mounting:
1/8"-27 dryseal thread (NPTF) 11/32" (8.73mm) long |
|
Pictures
shown may differ from the parts listed.
|
