Summit Hydraulics Hydraulic Monoblock Solenoid Directional Control Valve, 5 Spool, 13 GPM - 12V DC

Hydraulic Monoblock Solenoid Control Valve, 5 Spool, 13 GPM Hydraulic Monoblock Valves are a style of Hydraulic Control valve. These valves start and stop fluid flow into hydraulic cylinders. The number of cylinders that a control valve can operate is dependent on the number of spools on a valve. The flow rate listed is the maximum allowed GPM (Gallons Per Minute) that can be put through a valve. A common example of a hydraulic control valve is the loader valve on a tractor. Common Uses: Operate hydraulic cylinders (Double-Acting or Single-Acting). Grapples (Tilt/Raise Cylinders). Box Blade (Height Adjustment). Install rear remotes on a tractor. All spools are double acting with spring return to neutral position, A spool is designed to control double acting cylinders. A and B ports are closed to Tank in neutral position. Benefits: Precision ground and hard chrome-plated spools assure a long life. High-tensile strength cast iron monoblock construction. SAE O-Ring ports ensure solid seal and prevent blockages. Used for open center systems (Pump to Tank Flow). Adjustable Relief Valve Range: 1500 to 3625 PSI. Manual Override Features: 12 or 24 Volt DC Solenoids DIN 43650 3 Prong Connectors. Max Operating Pressure: P = 3625 PSI, T = 725 PSI, A & B = 4350 PSI. Preset Pressure Relief: 2610 PSI. Flow Rating: 13 GPM. (50 l/min). A & B Work Ports: #8 SAE O-Ring (3/4-16) Thread. Inlet Port: #10 SAE O-Ring (7/8-14) Thread. Outlet Port: #10 SAE O-Ring (7/8-14) Thread. N Port: #8 (1/2 14) G Thread (British Pipe Thread Parallel).